1 6

MOV-10-0000

MOOV

Moov MP15Ai 1.25 HP – Variable Speed ​​Pump

Moov MP15Ai 1.25 HP – Variable Speed ​​Pump

$1,199.00 CAD
$1,199.00 CAD
Sale Sold out
Shipping calculated at checkout.

49 in stock

1.25 THP variable-speed filtration pump for permanently installed swimming pools, from the Quebec-based brand Moov. Its speed is adjustable from 30% to 120%: at low speed, it filters very discreetly and consumes little power; at high speed, it provides the flow rate necessary for backwashing and vacuuming. Dual-voltage 115 V or 230 V, built-in Wi-Fi, saltwater compatible, and ENERGY STAR certified.

1.25 THPPower
30–120%Variable speed
115 / 230 VDual-voltage
3 yearsParts and labor
Hydro-Québec LogisVert subsidy: $300 Hydro-Québec pays $300 to owners of an eligible home for the purchase and installation of a new variable-speed pool pump purchased from a company with a business address in Quebec. The purchase and installation must be completed before November 30, 2026, the date the measure ends. You then submit the application yourself, online, no later than March 1, 2027: the amount is paid by Hydro-Québec and is not deducted from the purchase price. View LogisVert terms and conditions

Key Features

30 to 120% variable speedPermanent magnet synchronous motor, adjustable in 5% increments. It only runs at the necessary speed instead of being at full power all the time.
Auto mode with constant flowYou set a flow rate between 35 and 110 US gal/min: the pump measures system pressure and adjusts its speed to maintain it.
Very quiet36 dB(A) at 2,000 RPM according to the manufacturer: during standard filtration, you can barely hear it.
Built-in Wi-FiSchedule, speed, mode, and real-time consumption from the Moov Pool app, without any additional module.
Dual-voltage 115 V or 230 VAdapts to your existing power supply. At 230 V, it reaches its full power and maximum flow rate.
Self-primingPrimes itself up to 2 m above water level once the basket is filled with water at initial startup.
Saltwater up to 35 g/LSuitable for salt pools: its tolerance far exceeds the standard salinity of a salt pool.
ENERGY STAR certifiedENERGY STAR certified for Canada and NSF/ANSI 50 certified for pool and spa equipment.

Description

A traditional pump always runs at full speed, whether filtering water or backwashing. The Moov Ai MP15AIDV adapts its speed to the need: it filters at low speed for long hours, which reduces both energy consumption and noise, then increases speed for vacuuming or backwashing. Moov claims an average electricity savings of 50% per season compared to a single-speed pump.

Two modes are offered. In manual mode, you choose the speed from 30% to 120% in 5% increments. In Auto mode, you choose a flow rate, and the pump adjusts its speed to maintain it, even as the filter begins to load. Four daily time slots, a backwash button, and a skimmer mode (a short increase in speed at adjustable intervals to better clear surface debris) round out the programming.

The screen constantly displays power consumption in watts and the speed or flow rate. Built-in Wi-Fi allows for remote control of all settings, and a digital input and RS485 (Modbus) connector allows it to be connected to an automation system.

Technical Specifications

Model Moov Ai MP15AIDV
Power 1.25 THP (total horsepower)
Power Supply 115 V (8.3 A) or 230 V (5.2 A), 50/60 Hz
Max flow rate 110 US gal/min at 115 V, 123 US gal/min at 230 V
Max head height 66 ft (20 m)
Speed 30 to 120%, in 5% increments
Auto mode Target flow rate 35 to 110 US gal/min
Programming 4 daily time slots, backwash, skimmer mode
Fittings Moov unions for 1½ in or 2 in pipe (only the manufacturer's kit is permitted)
Self-priming Up to 2 m above water level
Saltwater Up to 35 g/L (3.5%)
Water temperature 50 °C maximum
Ambient temperature −10 °C to 42 °C
Protection IP55, Class F insulation
Control Built-in screen, 2.4 GHz Wi-Fi and Bluetooth, digital inputs and RS485 (Modbus)
Noise level 36 dB(A) at 2,000 RPM (manufacturer data)
Dimensions Approx. 597 × 254 × 294 mm (23.5 × 10 × 11.6 in)
Certifications ENERGY STAR (Canada and USA), NSF/ANSI 50
Warranty 3 years parts and labor (Moov)

Installation

Electricity Connection by a master electrician, on a circuit protected by a class A ground fault circuit interrupter (GFCI), with grounding and equipotential bonding. No extension cords.
Distance from pool At least 1.8 m (6 ft) from the inner walls of the pool.
Pool type Permanently installed swimming pool, in-ground or above-ground. Not suitable for soft-sided pools.
Location Horizontal, bolted to its base, protected from sun and rain, in a ventilated area, with 150 mm clearance around the motor.
Piping 2 in pipe recommended. No 90° elbows directly at the inlet: allow at least 350 mm of straight pipe before the pump.
Initial startup Fill the basket with water before starting: the pump must never run dry.

The Moov warranty requires the pump to be installed by a qualified technician and the electrical connection to be made by an electrician. The warranty begins on the date of purchase and is valid for a first installation only.

Winterization

In Quebec, the pump must be winterized when the pool is closed: drain the basket and the pump body, disconnect both unions, then store it indoors or protect it from snow. The manufacturer specifies that damage caused by improper winterization is not covered by the warranty.

FAQ

Am I eligible for the $300 subsidy?Probably, if you own a year-round residence (including a cottage) or a building with 19 units or less in Quebec, and the pump is purchased and installed before November 30, 2026. Hydro-Québec requires proof of ownership, an invoice in your name (matching your tax account or deed of sale) indicating the installation address and the mention "variable speed," as well as photos of the serial number and the motor's nameplate. One pump per household.
115 V or 230 V: which one should I choose?Both work. At 230 V, the pump achieves its full power and maximum flow rate (up to 123 US gal/min versus 110 at 115 V) and requires less amperage from the circuit (5.2 A versus 8.3 A). If your current pump is already wired for 230 V, that is the best choice.
Can it replace my current pump?In most cases, yes: Moov's 1½ in or 2 in unions cover common residential connections, and the self-priming works up to 2 m above water level. Check the voltage of your current pump and the available space (the Moov is about 60 cm long).
What speed should I choose for daily use?A low speed over a longer period filters just as well and consumes much less power than a high speed for a few hours. Reserve full speed for backwashing and vacuuming.
Does it work with a saltwater pool?Yes. The manufacturer lists it as compatible up to 35 g/L of salt, while a salt pool is usually maintained at around 3 g/L.
How do I control it remotely?With the Moov Pool app (iOS and Android). Pairing is done via Wi-Fi and Bluetooth, on a 2.4 GHz network: a separate 5 GHz network is not suitable. In the manual, the pump appears under the device name "InverFlow."
Can it be connected to an automation system?Yes. It has digital inputs (forced stop and three preset speeds) and an RS485 port compatible with Modbus.

Manual and Video

Presentation of the Moov Ai line by the manufacturer (video in English, 35 seconds).

Installation and operation manual (PDF, English, French, Spanish)

The French version of the manual contains translation errors. Notably, it instructs to "empty" the basket before startup, whereas you must fill it with water: the pump must never run dry. When in doubt, refer to the English version or call us.

Unsure about compatibility? Give us your pipe size, filter model, and current pump voltage (115 or 230 V): we will validate the replacement before you order. Write to us (418) 871-0658
View full details
Delivery everywhere in QuebecFast shipping of your orders
Guaranteed productsQuality equipment, supported
Secure PaymentVisa, Mastercard, Apple Pay and more
Local expertiseA Quebec City area team